Publicidad
Idiomas disponibles
Idiomas disponibles
1.1 Correct use / areas of application
Depending on model series, the pressure
sprayer must be used only to distribute the
following cleaning agents and disinfectants, or to
distribute clean water.
The pressure sprayers of the model series A
- Type 301 A and type 302 A
(sealing material FKM) are suitable for distribution
of acidic to pH-neutral spraying agents in the
pH-range from 1 – 7:
•
Cleaning agents and disinfectants,
•
Agents containing oil or chlorinated
hydrocarbon.
The pressure sprayers of model series B
- Type 301 B and type 302 B
(sealing material EPDM) are suitable for
distribution of pH-neutral to alkaline spraying
agents in the pH-range from 7 – 14:
•
Basic or alkaline disinfectants, cleaning and
care agents
•
Alcohol-containing cleaning agents and
disinfectants
The following applies to both model series:
The media used generally must be released for
application via pressure sprays by the
manufacturer.
Observe all instructions provided by the spraying
agent manufacturer.
The pressure sprayer must not be used for all
purposes not named above, such as
- spraying of paints
- distribution of
* flammable liquids
* sticky, residue-forming agents
* surfactants
* fluids with temperatures
above 40 C
- agents not intended for distribution by
pressure sprayers and storage of fluids!
To enable the operator in connection with the
spraying agent manufacturer to check the
material resistance to certain chemicals, we will
provide details of the type of materials used for
the pressure sprayer.
ENGLISH 5
1 Safety regulations
1.2 General safety instructions
•
before using the device for the first time and keep
them in a safe place thereafter. Always take great
care when using the device.
You can put your life at risk by failing to follow the
safety instructions.
It is also important to follow any relevant health
and safety regulations that apply to your place of
work.
Anyone who fails to follow the safety instructions,
operating instructions or maintenance instructions
will make themselves liable for any damage and
consequential damage caused as a result.
The operating instructions and the instructions
provided by the spraying agent manufacturer must
be kept available at all times wherever the device
is used or stored. They must be read by anyone
instructed to use the equipment or perform work
with or on the device (including servicing,
maintenance and repairs).
Keep persons and animals away from areas in
which you are working. Never spray in the
direction of other persons, animals or objects
that could be damaged as a result. The user is
responsible for any hazards or accidents
involving other persons and/or their property.
This equipment must only be hired out, lent or
passed on to persons who are familiar with this
type of equipment and its operation and who
have read the operating instructions. Always
ensure that you hand over the operating
instructions together with the device.
Never alter, change or modify any safety
equipment or operating controls.
Never use the device if any part of it is unsafe or
if it is not in an overall condition that makes it
safe to use. Before using the device always
check whether it is safe to use according to
section 2.2.
Immediately replace damaged parts. Only use
genuine SOLO replacement parts. Please note
that the use of non-genuine replacement parts
will invalidate your warranty.
Only use accessories and add-on parts that
have been supplied and specifically approved for
installation on the device by us.
When the device is not being used it should be
safely stored in a place where it will not
endanger the health and safety of others.
Prepare the device for storage according to
section 5.2. Ensure that the device is stored in a
safe place where unauthorized persons cannot
access it.
Please take the time to carefully read
through these operating instructions
Publicidad
