Publicidad
Idiomas disponibles
Idiomas disponibles
Blades move I Allow blades to stop _i_
.
_.
momentarily
i before removing
._%-_",_
after the r them from the cut.
_/p'_
tfigger is
._ _m_
• Keep children,
bystanders,
and ani-
mals away from work area a mini-
mum of 30 feet (10 meters)
when
starting
or operating
unit.
If situations
occur which are not cov-
ered in this manual,
use care and good
judgment.
If you need assistance,
con-
tact your Sears Service
Center or call
the Customer
Assistance
Helpline
at
1-800-235-5878.
HANDLE
FUEL WITH CAUTION
• Eliminate
all sources
of sparks or
flame (including
smoking, open
flames,
or work that can cause
sparks)
in the areas where fuel is
mixed, poured, or stored.
• Mix and pour fuel in an outdoor area;
store fuel in a cool, dry, well ventilated
place; use an approved, marked con-
tainer for all fuel purposes.
• Do not smoke while handling fuel or
while operating the unit.
• Do not fill fuel tank while engine is
running.
• Make sure the unit is properly as-
sembled and in good operating con-
dition.
• Avoid spilling
fuel or oil. Wipe up fuel
spills before
starting
the engine.
• Move at least 10 feet (3 meters)
away from fuel and fueling
site before
starting
engine.
• Always
store gasoline
in a container
approved
for flammable
liquids.
WARNING:
Blades can throw objectsviolentty
• You can be blinded or injured,
• Wear safety glasses.
WARNING:
Hazard zone for thrown objects
• Blades can throw objects violently.
• Others can be blinded or in ured.
• Keep peop e and an reals 30 feet
(10 m) away.
WARNING:
Blades move momentarily after the
trigger is released.
• The blades can seriously CUtyou or
others.
• Allow blades to stop before
removing them from the cUt.
OPERATE
YOUR UNIT SAFELY
DANGER:
RISK OF CUT; KEEP
HANDS
AWAY FROM BLADE - Blade
moves momentarily
after the trigger
is
released.
Do not attempt
to clear away
cut material
when the blade is in mo-
tion. Make sure the ON/OFF switch
is in
the OFF position,
the spark plug wire is
disconnected,
and the blade has
stopped
moving
before removing
jammed
material
from the cutting
blade.
Do not grab or hold the unit by
the cutting
blade.
• Inspect
unit before each use for
worn, loose, missing,
or damaged
parts. Do not use until unit is in
proper working
order.
• Keep outside surfaces
free from oil
and fuel.
• Never start or run engine inside
a
closed room or building.
Breathing
exhaust
fumes can kill.
• Avoid dangerous
environments.
Do
not use in unventilated
areas or
where
explosive
vapors
or carbon
monoxide
build up could be present.
• Do not overreach
or use from unsta-
ble surfaces
such as ladders,
trees,
steep slopes,
rooftops,
etc. Keep firm
footing
and balance
at all times.
• Do not raise unit above your shoul-
ders; the cutting
blade can come
dangerously
close to your body.
• Always keep unit in fi'ont of your body.
Keep all parts of your body away from
the cutting blade.
-3-
Publicidad
