Descargar Imprimir esta página

EXFO FOT-930 Guia Del Usuario página 104

Publicidad

Especificaciones técnicas
GENERAL SPECIFICATIONS
Size (H x W x D)
Weight
Temperature
operating
m
storage
Storage
Relative humidity
i
Power
Warranty (years)
STANDARD ACCESSORIES
User guide, AC adapter/charger, 2 Li-Ion batteries, shoulder strap, Certificate of Calibration.
NOTES
a. At 23 °C ± 1 °C and 1550 nm with FC connector and on batteries, unless otherwise specified.
b. Resolution, uncertainty and linearity are functions of input power; uncertainty is valid
at calibration conditions.
c. Up to 20 dBm for GeX.
d. Power of > –45 dBm for Ge, > –30 dBm for GeX and > –47 dBm for InGaAs.
e. In High source mode.
f. As defined by Telcordia TR-TSY-000887, rms for lasers and at –3 dB for LEDs;
typical values for LEDs.
98
250 mm x 125 mm x 75 mm
1 kg
–10 °C to 50 °C
–40 °C to 70 °C
Capacity of 1024 complete tests
0 % to 95 % non-condensing
Li-Ion battery (9 hours)
3 hours to fully recharge when unit is off
3
7
15
(9
/
in x 4
/
in x 3 in)
8
16
(2.2 lb)
(14 °F to 122 °F)
(–40 °F to 158 °F)
g. After a warm-up time of 6 minutes, in CW source mode.
h. Typical value, at 1550 nm for SM and 850 nm for MM.
i. Typical value.
j. For fiber length ≤ 120 km.
k. Typical value.
l. For graded-index MM fibers, typical.
m. Without batteries.
FOT-930

Publicidad

loading