Kenmore 116.36922 Manual Del Propietário página 15

,WARNING
Always unplug power cord from elec-
trical outlet before performing any ser-
vice on vacuum.
TO REMOVE DUST BIN
Lift dust bin handle located at the top of
the dust bin.
Dust Bin -
Handle
Pull the handle up
and lift dust bin up
and out of the vac-
uum cleaner,
Dust
Bin
Remove any clogs that might be located in
the suction port or filter port area.
TO EMPTY DUST BIN
Before removing debris from dust bin it is a
good idea to move the dust bin filter clean-
ing lever back and forth several times.
Moving the lever
back and forth Filter
loosens the dust Cleaning
and debris that Laver
has attached
itself to the filter
element inside
the dust bin,
Rotate dust bin handle to the vertical posi-
tion.
Hold dust bin Dust Bin
over a trash
container.
Press the dust
bin door
release button Door
downward to
Release
release the
Button
door.
The door will
swing open
and the debris
will fall into the
trash container.
Shake the dust
Emptying
Door
bin to release and debris that might hang
in the filter element.
Note: See PRIMARY FILTER REMOVAL
AND CLEANING section.
Door Door
Latch
After the dust bin is
empty of debris,
firmly close the
door. Make sure
you hear a "click"
sound to indicate
that the door is fully
latched.
TO REPLACE
DUST BIN
Place dust bin back
into vacuum cleaner
by inserting the bot-
tom first and tilting
back with the dust bin
handle raised.
Handle
Lower the dust
bin handle to
lock dust bin in
place.
A noticeable
"click" should
be heard.
15