LG DP272B Manual Del Propietário página 40

Setting up the Player (Continued)
Audio Connection to Optional Equipment
Connect the unit to your optional equipment for audio output.
You must set the Mode selection menu to "USB" or " DISC" mode.
Amplifier(Receiver)
COAXIAL
DIGITAL INPUT
and/or
Coaxial cable
(Not supplied)
Right side of unit
Amplifier equipped with 2-channel analog stereo or Dolby Pro
Logic ll / Pro Logic: Connect the AV IN/OUT jacks on the unit to
the audio left and right IN jacks on your amplifier, receiver, or
stereo system, using the audio cables.
Amplifier equipped with 2-channel digital stereo (PCM) or
audio / video receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS): Connect one of the unit
Coaxial jack to the corresponding in jack on your amplifier. Use an
optional digital audio cable.
L
R
AUDIO INPUT
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality.
Audio/ Video For this you need a multi-channel audio / video receiver that sup-
cable (Supplied)
ports one or more of the audio formats supported by your unit
such as MPEG 2, Dolby Digital and DTS. Check the receiver man-
ual and the logos on the front of the receiver.
NOTES
•
• Six Channel Digital Surround Sound via a digital connection can
• To see the audio format of the current DVD in the on-screen dis-
40
If the audio format of the digital output does not match the capabil-
ities of your receiver, the receiver produces a strong, distorted
sound or no sound at all.
only be obtained if your receiver is equipped with a Digital Multi-
channel decoder.
play, press AUDIO.