Sthor 82190 Manual Original página 14

EN
To switch off the blower, move the switch to the "off - 0" position, wait until the operation of the machine is completely stopped,
disconnect the machine from the power supply by disconnecting the battery. Next, proceed with maintenance.
PRODUCT MAINTENANCE AND STORAGE
Whenever you have fi nished working, make sure the unit is disconnected from the power supply. Ensure that the battery is re-
moved from the product and proceed with maintenance. Remove the air duct and nozzle as indicated in the installation section.
Do not disassemble components by force and/or using tools to avoid damaging the product. Clean both the ventilation openings
and the inlet and outlet with a soft handheld brush or a painting brush with plastic bristles. Clean the housing, handle, and controls
with a soft, slightly dampened with water cloth and then dry them. A compressed air stream with a pressure not exceeding 0.3
MPa can be used for cleaning. Once the nozzle is removed, it can be cleaned with a jet of water and then dried or left to dry. Do
not use sharp objects, abrasives, solvents, or alcohol for cleaning.
Product storage
Store the product disassembled. The storage area should guarantee that unauthorised access to the product is prevented. The
storage area must be protected from moisture, direct sunlight, and excessively low temperatures. Store the product in a temper-
ature range 0~+40°C with a maximum relative humidity of 80%. It is recommended to store the product in the original packaging.
O R I G I N A L I N S T R U C T I O N S
14