Publicidad
Idiomas disponibles
Idiomas disponibles
Keys
(1) Oil Drain Tube
For Future Use
Slope
Sheet
(2) Keys
"{our new tractor
has been assembled
at the factory with the exception
of those parts left
unassembled
for shipping
purposes.
TOOLS
REQUIRED
FOR ASSEMBLY
A socket wrench
set will make assembly
easier.
Standard
wrench
sizes are listed.
(1) 1/2" wrench
Tire pressure
gauge
(2) 7/16" wrenches
Utility knife
LABEL
Pliers
When right or left hand is mentioned
in this
manual, itmeanswhenyou
are in theoperating
position (seated behind the steering wheel).
TO
REMOVE
TRACTOR
FROM
CARTON
UNPACK
CARTON
•
Remove
all accessible
loose parts and
parts cartons
from carton.
•
Cut along dotted lines on all four pan-
els of carton.
Remove
end panels and
lay side panels flat.
•
Check for any additional
loose parts or
cartons
and remove.
BEFORE
REMOVING
TRACTOR
FROM
SKID
CHECK
BATTERY
1, Lift hood to raised position,
NOTE:
If this battery is put into service
after month and year indicated
on label
(label is located
between
terminals)
charge
battery
for minimum
of one hour at
6-10 amps,
(See "BATTERY"
in Mainte-
nance
section
of this manual
for charging
instructions).
ADJUST
SEAT
1. Sit in seat.
2.
Lift up adjustment
lever (A) and slide seat
until a comfortable
position
is reacl_ed
which allows
you to press clutch/brake
pedal all the way down,
3.
Release
lever to lock seat in position.
7
Publicidad
