Introduction/Scope Of Supply - BEHA Unitest 9038 Manual De Instrucciones

Contents
Contents
1.0 Introduction/Scope of Supply ..............................19
2.0 Safety ..................................................................20
3.0 Controls and Connections....................................20
4.0 Operation ............................................................21
4.1 Preparation and Safety Measures ........................21
4.2 Operation ............................................................22
5.0 Maintenance ........................................................28
5.1 Changing the Battery............................................28
5.2 Cleaning ..............................................................29
6.0 Technical Data......................................................30
References marked on instrument or in instruction
manual:
Warning of a potential danger, comply with instruction
manual.
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical
shock.
Conformity symbol, the instrument complies with the
valid directives. It complies with the EMV Directive
(89/336/EEC), Standards EN 50081-1 and EN 50082-
1 are fulfilled. It also complies with the Low Voltage Di-
rective (73/23/EEC), Standard EN 61010-1is fulfilled.
The instruction manual contains information and ref-
erences, necessary for safe operation and maintenance
of the instrument. Prior to using the instrument (com-
missioning / assembly) the user is kindly requested to
thoroughly read the instruction manual and comply
with it in all sections.
Failure to read the instruction manual or to comply with
the warnings and references contained herein can re-
sult in serious bodily injury or instrument damage.
18
Page
1.0 Introduction / Scope of Supply
The UNITEST Wallscanner is an accurate and sturdy elec-
tronic tool used to detect wood, metal and „hot" electrical
wires in walls, floors and ceilings of conventional cross-sec-
tions. The UNITEST Wallscanner also detects rebar in con-
crete. The UNITEST Wall-scanner features three different
scanning modes plus continuous „hot" electrical wire de-
tection, ergonomic hand grip and controls, and a rugged,
high impact plastic case. The UNITEST Wallscanner is de-
signed to provide years of dependable and reliable use.
• Ideal drilling and mounting support
• Detects wood, metal and „hot" electrical wires
• Optical and acoustic indication
• Clear LCD display bars
• Ergonomic, rugged casing
• Single handed operation
Scope of supply:
1 pce. UNITEST Wallscanner
1 pce. Battery 9 V, IEC 6LR61
1 pce. Instruction manual
1 pce. Quick-Reference-Guide
Transport and Storage
In order to avoid instrument damage, it is advised to remove
batteries when not using the instrument over a certain time pe-
riod.
Instruments must be stored in dry and closed areas. In the case
of an instrument being transported in extreme temperatures, a
recovery time of minimum 2 hours is required prior to instru-
ment operation.
Introduction / Scope of Supply
19