Descargar Imprimir esta página

Beper RI.062 Manual De Instrucciones página 10

Termoconvector split digital

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28
Digital fan heater Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
DO NOT ALLOW CHILDREN, DISABLED PEOPLE OR
EVERY PEOPLE WITHOUT EXPERIENCE OR TECH-
NICAL ABILITY
ARE NOT PROPERLY WATCHED OVER. CLOSE SU-
PERVISION IS NECESSARY WHEN ANY APPLIANCE
USED BY OR NEAR CHILDREN.
MAKE SURE THAT CHILDREN DO NOT PLAY WITH
THIS APPLIANCE.
IF YOU DECIDE NOT TO USE THE APPLIANCE ANY
LONGER, MAKE IT UNSERVICEABLE BY SIMPLY
CUTTING THE SUPPLY CABLE AFTER DISCONNEC-
TING THE PLUG FROM THE SOCKET.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
INSTALLATION
Drill two holes in wall and have a distance of above 2.0m from the ground, the diameter of the hole
just contained the inflated plastic pipe, which the diameter is 6mm. After tucked the inflated plastic
pipe, fixed pothook on the pipe with screw. Make sure pothook should be inserted the bottom. See
the drawing as following for a better understanding. (see the picture)
Use the machine's components (screws and expansion pipe) fix on the wall as following figure, then
mounted the machine.
All manuals and user guides at all-guides.com
TO USE THE APPLIANCE IF THEY
10

Publicidad

loading