Descargar Imprimir esta página

Sears KENMORE ELITE 665.1479 Manual De Uso página 19

Lavavajillas

Publicidad

Idiomas disponibles

Idiomas disponibles

Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When Locked is lit, all buttons are
disabled. The dishwasher door can still be opened/closed
while the controls are locked.
To turn on Control Lock
Press and hold TOP RACK ONLY for 3 seconds. Locked will light. If you press any pad while your dishwasher is locked, the light
flashes 3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off Control Lock
NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL/DRAIN,
or by opening and closing
the door before you are able to turn off Control Lock.
Press and hold TOP RACK ONLY for 3 seconds. The light turns Off.
Cycle Indicators and Time Display
WASHING
DRYING
SANITIZED
COMPLETE
WASHING
_
SANITIZED
D_YING
CO/_PLET_
The indicators glow when the dishwasher is washing, drying, complete, and/or
sanitized. They also
glow when the control is locked and/or
the delay option is selected.
The Status Display is used to follow the progress of the dishwasher cycle and to show other
information.
Estimated cycle time is displayed
in hours and minutes as you make cycle and option selections.
After you start the dishwasher, the display counts down the time.
When you select the Delay option, the time display will give the number of hours followed
by an
"H".
4
The single indicator
light on the front of the door panel (A) will remain blue during wash/rinse,
red
during dry, and white when complete.
i _ i
_
i_ix
_ii i _
Selecting Cycles and Options
1. To repeat the same cycle/options
used on previous cycle, press START/RESUME once to show which selections you used. To
change cycle, select desired cycle.
2. Select the desired options, then press START/RESUME to start the cycle. Not all options are available
for every cycle. If an
invalid option is selected for a given cycle, the lights will flash.
Turning OFF/ON
the Sound
Press and hold HIGH TEMP for 3 seconds to toggle sound On and Off. The sound will not deactivate
for cycle interruption
or
service required messages.
19

Publicidad

loading