Uline H-10310 Instrucciones De Montaje página 3

WALL ANCHOR
1. Attach one bracket of wall anchor to back of top
panel of bookcase using two M4 x 20 mm screws.
(See Figure 5)
2. Using bracket as template, mark holes on wall where
plastic anchors are to be located. Drill holes in wall
using 5/16" drill bit. Insert two plastic anchors into
previously drilled holes. Secure bracket to wall with
two M4 x 40 mm screws. (See Figure 5)
3. Loop cable tie through mounts and tighten.
(See Figure 5)
PAGE 3 OF 9
ASSEMBLY CONTINUED
Figure 5
1-800-295-5510
uline.com
Top Panel
Cable Tie
Wall
0123 IH-10310