Care:
• When the air filter is removed, the engine should not start, otherwise dirt is
attracted to the engine through the carburetor, causing the engine to
break down quickly.
3.7. Check the pump
1. Before operating, the pump should be filled with water.
Care:
• Do not operate when there is no water in the pump, or the temperature of
the pump is too high, otherwise the pump seal may be damaged. If you
find that you are working without water, immediately turn off the engine and
add water once it cools down.
4. OPERATION
4.1. Open the gas valve.
4.2. Close the choke.
Attention:
•
When the engine is hot or the ambient temperature is high, it is not
necessary to use the choke. (Do not close the choke before lighting.)
4.3. Turn the switch to the ON position.