SAKAWA SP42 Manual página 64

• Check the Spark Plug. If you see that it is excessively worn, change it. If
there are traces of charcoal, clean with a comb.
• Measure the spark plug spacing.
• Adjust the gap by moving the electrode.
• The gap should be 0.7-0.8 mm.
• Check the spark plug seal, Thread the spark plug using a special tool so
as not to break the thread...
Attention:
• When you install the new spark plug, and you have pressed against the
seal, the new spark plug should screw in 1/2 turn more. If used, 1/8~1/4
turn more.
Care:
• Make sure to tighten the spark plug properly, otherwise it will cause it to
overheat and could cause damage to the engine.
7. TRANSPORT & STORAGE
• Cools engine before storing.
• When handling the pump, turn the fuel valve to the OFF position, position the
pump to prevent gasoline spillage.
Long-term storage:
7.1. Make sure the storage area is dry and clean.
7.2. Clean internal parts of the pump, and pour clean water. Then unscrew the
water plug so that it drains completely...