KSIX URBAN 4 Manual De Usuario página 2

1.4 How to attach and remove the straps
Although only one strap is included in the box, the straps of the Urban 4 are interchangeable.
The shorter strap must be placed in the display's top slot, while the longer strap must be
placed in the display's bottom slot. Otherwise, the insertion system may be irreparably
damaged.
1. To remove a strap: Hold the strap, press the button on the back of the watch on the
corresponding strap piece and slide it to the left.
2. To insert a strap: Hold the strap and then slide it to the right until the strap is fully inserted
into the watch body.
The straps have small metal pieces on both ends that must be inserted into the watch body
rail.
1.5 Charging
The Urban 4 smartwatch's full charge time is approximately 4 hours, and the battery can last
up to 5 days depending on the usage.
Use the 60 cm USB-A cable with magnetic charging base that is included in the box to
charge the smartwatch. Connect the USB-A connector to a charger, computer output or
powerbank and place the magnetic base in a way so that it properly sticks to the back part
of the body watch.
1.6 Power on/off
To turn on the smartwatch press the dial for 3 seconds.
To turn o the smartwatch, press the button for 2 seconds; 2 options will appear: power o
and restart. Tap on the desired icon and slide it to the right.
You can also turn it o from the settings inside the smartwatch.
1.7 About IP protection rating
The Urban 4 smartwatch has an IP68 protection rating. This means that it can withstand
being submersed under water 1,5 meters for up to 30 minutes. Make sure to use the
auto-drain function after submerging it; you will find it in the options menu depicted as a
water drop icon.
Note: In case of swimming in the sea or in a saltwater pool, it is recommended to rinse the
watch with fresh water after immersion due to the corrosive e ect of salt water.
2. Initial setup
2.1 Download the app
The Urban 4 smartwatch compatible app is called MActivePro. There are several ways to
download it:
- Tap here to download the MActivePro app from Google Play or App store.
ht t p s: / / p l a y. g oogl e . c om/ s t o r e / a pps/ d et a i l s ?i d =com. n j j . m act i v epr o &hl = es&gl = US
https: / /apps. a ppl e . c om/i n /app/macti v epro/i d 1587451906
- You can also download the app directly by typing "MActivePro" in the Google Play or App
Store search engine.
- Another way to download the app is from a QR code. To access this QR code swipe the
main screen to the right and tap on the QR code icon.