Fermax DUOX VIDEO SKYLINE Manual De Instalador página 19

DUO DUO X X X X X V V V V V ideo Sk DUO ideo Sk ideo Sk
DUO DUO ideo Sk ideo Sk yline
DUO DUO DUO X X X X X V V V V V ideo Sk ideo Sk ideo Sk
ideo Sk yline
DUO DUO ideo Sk
Configuration - Programming the Amplifier
The DUOX amplifier can be configured to allow for the operation
as a general entrance, block entrance or sub-block entrance.
•
The DUOX system uses 6 digit house terminal addresses.
•
These call code digits are organised as follows: BBSSNN:
- BB: indicates the Block number, (from 00 to 99).
- SS: indicates the sub-Block number, (from 00 to 99).
- NN: indicates the sub-Block house number, (from 00 to 99).
You do not have to segregate the installation according to this
hierarchy since the system adapts to the installation´s needs.
IMPORTANT NOTE:
Configuration of the parameters by the installer.
To configure the Skyline push button panels see ANNEX: Voice
assisted configuration in button panels. Instructions included
with this equipment. You can also configure it by temporarily
connecting a keypad ref. 7439, download the Direct Video Duox
Panel Programming Manual, cod. 97760, at www.fermax.com.
In DIRECT Panel configurations (with keypad), to program these
parameters, you must download the manual from our website.
yline yline
yline yline
yline yline
yline
yline
Pag 19