Descargar Imprimir esta página

Bimar FE-45D Folleto De Instrucciones página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

 The power socket must be easy to reach so the plug can be removed quickly in
case of emergency.
 Do not place the fan on a shelf and/or near sinks or other container of liquids
(minimum distance of 2 meters) to avoid the risk of it falling in.
 Keep the fan far away from fabrics (curtains, etc.) or unstable materials that
could obstruct the air intake grille; make sure that the front is free of unstable
materials (dust, etc.).
 Make sure that the electric cord is not touching rough, hot or moving surfaces
and not twisted or wrapped around the appliance.
 Stand the appliance on a horizontal, flat surface or table; do not stand on a
inclined plane (the appliance could upset).
 Do not place the appliance near an open flame, cooking or other heating
appliance.
Wall installation
 The appliance must only be used if secured to a wall: the wall must be flat,
smooth, very stable (as the appliance could tip over) and resistant.
 Position the appliance far from other sources of heat, inflammable materials,
curtains, carpets, etc., inflammable gases or explosive materials (spray cans).
 If the appliance is fitted to a wall, the same must be made of masonry and/ or of
resistant material (not of wood or synthetic material); follow the indications
below for installation:
- The wall fan must be installed at least 2 m above the floor (below picture)
- fix two hooks to the wall (below picture) at a distance of 35cm apart, make the
holes on the wall, inserting the hooks into the slots provided with screws.
- Attach the appliance on the wall with two hooks; once completed, ensure the
fan is securely installed onto the wall.
11

Publicidad

loading

Este manual también es adecuado para:

Vs56