Publicidad
Idiomas disponibles
Idiomas disponibles
11.Replace the lower hinge part to the
left side and fixing it with the special
flange screws. Replace the adjustable
bottom feet parts to another side and
and pre-fixing it.
12.Transfer the lower door to the
property position, adjust the lower
hinge part, make the hinge axis into the
lower hole of the lower door, then tight
the bolts.
13.Slot the lower door onto the
bottom hinge pin and hold in
position. Turn the middle hinge by
180°, change the washer on the axis
to the lower side, adjust the middle
hinge to the appropriate position
and then install it ensuring the lower
door in secured in place.
Note: washer may stick
to lower door
14. Transfer the upper door to the
appropriate position. Secure the door's
level, make the middle hinge axis into
the lower hole of the upper door.
15.Move the upper door to an
appropriate position, and then fix
part
upper door by hand when
installing).Install the upper hinge
cover
Install the screw hole cover ⑤
on the top right corner of the refrigerator.
①
Self tapping screw
②Upper hinge cover
③Special flange screw
④Upper hinge
⑤Screw hole cover
16. Open the upper door and install the
door racks and then close it.
Note:
If your appliance has handle, you
have to reverse handle by follow
instructions below.
Remove the upper door and place it
on a smooth surface with its panel
upwards. Lever part
then loose screws . Change
handle
screws , part
middle hinge part
screws
washer
Warning! When changing the side at which
the door opens, the appliance must not be
connected to the mains. Remove plug from
the mains beforehand.
④
③
by screws .(Please hold the
②
on the left corner by screw .
①
②
③
④
-
①
and part ,
②
③
to the right side, then install
②
①
and part
12
①
⑤
④
④
in turn.
Publicidad
