Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for use
To work with this instrument in safety, it is essential to read the instructions operating and care
instructions carefully and strictly comply with them.
Stuck
Place the suction cup on the
clean and dry surface of the
material to be moved so that
the red line is visible.
Unstuck
(fig.1)
WARNING:
Check the suction cup before each use to make sure it has no bumps or nicks.
The maximum load capacity of the suction cup is 150 kg, do not lift more weight than this.
Make sure the area where the suction cup will suck is clean, free of water, grease and oil.
Avoid the suction platform is damp, wet or oily.
Avoid using the suction cup for other uses not indicated in this manual.
Avoid using the suction cup in adverse weather conditions, very cold, very hot or rainy.
Avoid exposing the suction cup to high temperatures (don't leave it in the sun or inside a vehicle in the sun).
Do not handle the suction cup with sharp or pointed objects.
Press the push button on the
suction pump with your finger until
the charge indicator is inside.
When the red line is not visible,
there is sufficient vacuum for the
suction.
To release the suction cup press the pressure release button (fig.1), you
can also detach and quickly release the pressure by slightly lifting the
instant release tab (fig.2).
OK
When you notice that the suction
cup is firmly attached, you can
proceed to lift the object. The
maximum load capacity is 150 kg
horizontally and 100 kg vertically. If
the red line appears during lifting,
or the pressure gauge is indicating
lower values (red colour),immedia-
tely deposit the load and pump the
plunger again until the values are
optimal.
(fig.2)
168 kg
Publicidad
