Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
Keep the suction cup clean from dust or dirt.
Use a damp cloth to gently wipe the suction platform to remove all residues
and allow it to dry (never expose it to the sun).
IMPORTANT! Avoid excess moisture. Protect the air filter from moisture to
prevent it from penetrating inside.
Inspection
Before use, examine and test the suction cup to ensure that it is functioning
properly and is free from defects:
- Cuts or damage to the sealing edges of the rubber pad.
- Cracks or dents in the handle or pump.
- Plunger without vaseline or poorly lubricated.
- Slow pressure loading action.
- Excessive shine or stiffness of suction pad rubber.
- Missing air filter on suction platform.
In the event that the tool has a lack or loss of pressure,
check the following 3 points:
1.- Remove the plunger and check that it is not dry and has sufficient vaseline.
2.- Check that the pressure release button is not clogged or with traces of dust and dirt.
3.- Make sure that the sleeve under the release button remains inserted inside the valve.
If it is slipped down and out of the valve, due to high temperature, it may lose pressure (fig.3).
After use, cover the suction platform with the protective cap (fig.4).
For added protection, store the suction cup in the case until further use.
As ageing and wear reduce the capacity of the suction cup, it is recommended
to replace the suction cup after about 2 years of use.
Warranty
It will be effective for 1 year only against possible manufacturing defects, starting from the purchase date
indicated on the original sales receipt.
Declaración de conformidad
NOGOSA IBÉRICA, S.L.U., declares that the VACUUM SUCTION CUP WITH GAUGE COLOTOOL
(Ref. 20466), by its design and manufacture, is in compliance with safety specifications. Any modification
to the tool without prior notice will invalidate this declaration.
fig.4
fig.3
®
Publicidad
