Publicidad
06. Troubleshooting
Faults
Slow inflation
Failure to
turn this product on
Failure to inflate
under the
power-on mode
Failure to adjust preset
pressure up or down
Normal inflation but zero
pressure displayed
Automatically power-on
of the air compressor
after screwing the valve
Air leakage when
connecting air tube
Incorrect unit
displayed
Solutions
1.Whether the power is sufficient 2. Check whether the
air tube is leaking 3. Check whether the connecting
parts at both ends of the air tube are screwed tight 4.
Check whether the inflated object is leaking
Turn on the machine after it is fully charged.
1. Check whether the power is sufficient
2. Check whether the current tyre pressure is higher
than the preset pressure
Check whether the product is in an incorrect profile,
select the free mode without any icons lighting on to
adjust the preset value within a range of 3-120psi
Low-pressure inflatable products such as balloons are
not included in the measurement range of the device
Press and hold the "power" button to turn on the
product again
Tighten the air tube
Check whether the unit switch button is poked in
place
20
Publicidad
