Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
,_
WARNING:
To reduce the risk of fire, explosion, or damage to Vac:
• Do not leave Vac running while unattended - you may fail to notice important signs indicating
abnormal operation such as loss of suction, debris/liquid
exiting exhaust, or abnormal motor
noises.
Immediately stop using Vac if you notice these signs.
• Do not leave Vac plugged-in when not in use.
• Do not continue running when float has cut off suction.
• Do not operate Vac in areas with flammable gases, vapors or explosive dust in the air.
Sparks inside the motor can ignite airborne flammables.
Flammable gases and vapors
include:
lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol, or aerosol
sprays.
Flammable dusts include:
coal, magnesium,
aluminum, grain, or gun powder.
• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
• Do not use Vac as a sprayer.
_,
WARNING:
To reduce the risk of electric shock or injury:
• Do not expose to rain or allow liquid to enter motor compartment.
Store indoors.
• Do not handle plug, switch, or Vac with wet hands.
• Do not service Vac while it is plugged-in.
If your Vac is not working as it should, has missing
parts, has been dropped, damaged, left outdoors, or dropped into water, return it to an
independent
service center or call customer service.
• When using an extension cord, use only outdoor-rated
cords that are in good condition.
Do not allow the connection to come into contact with liquid.
• Do not vacuum toxic materials to reduce the risk of inhaling the vapors or dust.
Polarized
Plug
To reduce
the risk of electric
shock,
this
Vac has a polarized
plug (one blade
is
wider than the other). This plug will fit in a
polarized
outlet
only one way. If the plug
does not fit fully in the outlet,
reverse
the
plug. If it still does
not fit, contact
a
qualified
electrician
to install the proper
outlet.
Do not change
the plug in any way.
After you plug the power cord into the
outlet, turn the unit on by pushing the
switch from position "0" to position "1".The
symbols used on the switch actuator are
international "On & Off" symbols:
0
= OFF
I
= ON
Accessory
Usage
Familiarize
yourself
with the accessories
included
with the Vac. Each accessory
may
be used in various
ways for vacuuming
and
blowing debris.
Here is a list of the
accessories
and their uses.
Utility
Nozzle
- General
purpose
nozzle for
most vacuuming
applications.
Wet Nozzle
- Used for wet pickup
on
smooth
surfaces
to pick up liquid and dry
the surface
in one stroke.
Claw
Nozzle
- Used for wet or dry
pickup.
Busting
Brush
- Dry pickup
of dust and
dirt debris.
Extension
Handles
- These
handles
can
be connected
together
and provides
additional
length for more reach.
Hose
- Provides
transfer
of vacuum
or
blowing
capability
to the worksite.
Provides
the means
of attaching
extension
handles
and nozzles.
Crevice
Tool
- Use to pick up debris
in
hard to reach
locations.
10
Publicidad
