Publicidad
Idiomas disponibles
Idiomas disponibles
The DELTA 36-T30 T3 and the DELTA 36-T50 T3 fence systems include the fence assembly, front rail, rear rail and
front guide tube along with the mounting hardware for assembling the fence system to most DELTA Table saws and
to some non-DELTA table saws.
In addition, the DELTA 36-T50 T3 fence system also includes an accessory leg kit, to be used with a wooden
extension table. The wooden extension table is purchased separately or can be constructed by following the
instructions in this manual.
NOTICE: The illustrations contained in this manual show the 36-T30 T3 fence system as it installs on the DELTA
36-729 table saw. These figures are intended to illustrate technique only. The specific configurations and hardware
needed to attach this fence to your particular saw may vary.
1. Rear Guide Rail (1)
2. Front Guide Rail (1)
3. Guide Tube (1)
4. 36-T30 T3 or 36-T50 T3 Fence (1)
5. Support Legs (included with the 36-T50
T3 only) (2)
HARDWARE PACKAGE
Description
⅜-24 X 1 ¼" hex head screw
⅜" Split lock washer
⅜ -24 hex flange nut
5/16-18 X 7/8" hex head screw with
washer
5/16-18 X 1 1/8" flat head socket
screw
5/16 countersunk star washer
¼ -20 x ½" button head screw
5/16-18 hex flange nut
Alignment Gauge
3/16" T-handle hex wrench
5/32" Hex drive allen wrench
ADDITIONAL HARDWARE PACKAGE
Description
¼-20 X 1 ¼" Flat head screw
1/4 -20 Hex nut
1/4 by 7/8 Flat washer
1/4 Lock washer
#8 X ¾" Self-tapping screws
10-32 X 1 ¾" Pan head bolts
NOTE: The DELTA 36-T30 T3 and 36-T50 T3 are designed to be used with a variety of DELTA table saws. It is also
possible to install this fence on non-DELTA saws. This kit contains a variety of hardware types and sizes, not all of
which are necessary to attach this fence to your specific saw. Use the hardware that best fits your saw and enables
you to attach the fence rails and guide tube securely to the saw.
FUNCTIONAL DESCRIPTION
CARTON CONTENTS
Qty.
2
2
2
9
10
2
6
19
1
1
1
(included with the 36-T50 T3, for attaching extension table and legs).
Qty.
8
8
8
8
8
4
1
2
3
4
5
Description
10-32 Hex nuts
#10 Flat washers
3/8-16 Hex nuts
1/4 Lock washer
3/8-16 Leveling feet
4
Qty.
4
4
2
8
2
Publicidad
