Publicidad
Idiomas disponibles
Idiomas disponibles
Explanation of symbols
The triangular high voltage symbol is used to warn of the risk of
injury or health hazards (e.g. caused by electric shock).
The triangular warning symbol indicates important notes in this user manual which
must be observed.
This symbol indicates special tips and notes on the operation of the unit.
Important safety information
All guarantee claims are invalid in the event of damage caused by non-compliance with
this user manual. We cannot be held liable for resulting damage.
In the event of material or personal damage caused by improper operation or non-
compliance with the safety information, we cannot be held liable. All guarantee claims
are void in such cases.
This device has been manufactured in accordance with international safety standards.
Please read the following safety instructions carefully.
Safety information
1. Power supply
5–12 V DC/1 A
Only operate this device through a power source which supplies the mains power specified on the
type plate. If you are unsure of the installation location's power supply, contact your power supply
company. Disconnect the device from the power supply before carrying out maintenance or
installation work.
2. Overloading
Avoid overloading electrical sockets, extension cables, and adapters, as this can result in fires or
electric shocks.
3. Liquids
Only install the device in dry rooms which are protected from dust. Protect
the device from the ingress of liquid of any kind.
4. Cleaning
Only use a damp cloth to clean the device. Do not use corrosive cleaning materials.
Disconnect the device from the power supply before cleaning.
5. Ventilation
The ventilation openings on the device must not be covered up or obstructed
Prevent objects from penetrating the device, e.g. via the ventilation openings.
6. Accessories
Only connect devices that are expressly suitable for the intended purpose. Otherwise, hazardous
situations or damage to the device can occur.
7. Installation location
Only install the device in dry rooms which are protected from dust. Protect the device from the
ingress of liquid of any kind.
Never place the converter in close proximity to heaters, stoves, other sources of heat, or in direct
sunlight. Only operate the device in locations where temperatures stay within the permitted
ambient temperature range of 0°~50°C.
15
English
Publicidad
