Metabo HPT CD 1805DB Manual página 6

English
A TYPICAL ILLUSTRATION OF PROPER HAND
SUPPORT WORKPIECE SUPPORT, AND SUPPLY
CORD ROUTING.
4. Place the wider portion of the saw base on that
part of the work piece which is solidly supported,
not on the section that will fall off when the cut is
made.
As examples, Fig. 2 illustrates the RIGHT way to cut
off the end of board, and Fig. 3 the WRONG way. If
the work piece is short or small, clamp it down.
DON'T TRY TO HOLD SHORT PLACES BY HAND!
5. Never attempt to saw with the circular saw held
upside down in a vise.
This is extremely dangerous and can lead to serious
accidents. (Fig. 4)
6
Fig. 1
Fig. 2
Fig. 3
6. ALWAYS wear ear protectors when using the tool
for extended periods.
Prolonged exposure to high intensity noise can cause
hearing loss.
7. Always wear eye protection that meets the
requirement of the latest revision of ANSI
Standard Z87.1.
8. ALWAYS wear a mask or respirator to protect
yourself from dust or potentially harmful
particles generated during operation.
9. Before setting the tool down after completing a
cut, be sure that the lower (telescoping) guard
has closed and the blade has come to a
complete stop.
10. NEVER touch moving parts.
NEVER place your hands, fingers or other body parts
near the tool's moving parts.
11. NEVER operate without all guards in place.
NEVER operate this tool without all guards or safety
features in place and in proper working order. If
maintenance or servicing requires the removal of a
guard or safety feature, be sure to replace the guard
or safety feature before resuming operation of the
tool.
12. Use right tool.
Don't force small tool or attachment to do the job of a
heavy-duty tool.
Don't use tool for purpose not intended —for example
— don't use circular saw for cutting tree limbs or logs.
13. NEVER use a power tool for applications other
than those specified.
NEVER use a power tool for applications other than
those specified in the instruction manual.
Fig. 4