Digital Projection TITAN 1080p-500 Información Importante página 9

Digital Projection TITAN 1080p-500/250, sx+-500, HD-500/250, XG-500
Contrast Ratio
Pixel fi ll factor
Lamp power
Lamp life (typical)
Brightness
Colour temperature
Electrical
Inputs
Pixel clock
Control inputs
Mains voltage
Power consumption
International Regulations
Indicators
Physical
Operating Temperature
Storage Temperature
Thermal Dissipation
Operating Humidity
Weight
Rev E March 2008
1080p 500: >2000:1 250: >5000:1 full fi eld (±10%)
sx+ 500: >1600:1 full fi eld (±10%)
HD 500: >1200:1 full fi eld (±10%) (High Brightness lens)
HD 250: >4000:1 full fi eld (±10%) (High Contrast lens)
XG 500: >1200:1 full fi eld (±10%)
1080p: 87%, sx+, HD, XG: 90%
500: 2 x 250W, 250: 1 x 250W
500: 1500 hours in dual lamp mode , 3000 in single lamp
mode
250: 1500 in single lamp mode
1080p 500: 6000 ANSI lumens (±10%) in dual lamp mode
1080p 250: 2000 ANSI lumens (±10%)
sx+ 500: 5500 ANSI lumens (±10%) in dual lamp mode
HD 500: 4500 ANSI lumens dual lamp (High Brightness lens)
HD 250: 1600 ANSI lumens (±10%) (High Contrast lens)
XG 500: 4500 ANSI lumens (±10%) in dual lamp mode
Native: 7500°K (±1000°K),
White balance adjustment: 3000°K - 10000°K
RGB1, RGB2, DVI, Composite Video, S-Video, Component.
sx+ 500 and 1080p only: and SDI
up to 165MHz
1 x LAN
1 x wifi LAN (FCC ID: R68WIPORT)
1 x RS232 serial: 19200 baud, 8 bits, 1 stop bit, no parity
1 x remote control
100-230 VAC ±10%, 48-62Hz (single phase)
500: 750 W, 250: 500W
Meets FCC Class A requirements
Meets EMC Directives (EN 55022, EN 55024, EN 55103)
Meets Low Voltage Directive (EN60950)
Input, Power, Shutter, Error, IR, Lamp 1, Lamp 2 (500 only)
0 to 40°C
-10 to 50°C
500: 2600 BTU/hr, 250: 1733 BTU/hr
20% to 80% non-condensing
approximately 27 kg (60 lbs)
FCC WIFI ID, R68WIPORT
English
Page 9