Bergstrom OpenAir Manual De Instrucciones página 17

• Check the unit's refrigerant charge by checking low pressure with the unit running; if the
pressure is below 0.5 or above 5.0 bars, recover the charge and discharge the air for at least
30 minutes, then introduce 300 g of R134a gas in the circuit.
• Clean the condenser with pressurised air.
• Connect or replace the condenser fan.
• Check the low pressure and clean the circuit or replace any clogged components if it is below
0.5 bars with the unit running.
TROUBLESHOOTING
Solution
EN
OPENAIR
17
TU ESPACIO DE VIDA CONFORTABLE