Oase Eco Control Instrucciones De Uso página 11

Safe operation
• Never operate the unit if an electrical cable is defective!
• The supply cord cannot be replaced. If the cord is damaged, the appliance should be scrapped.
• Do not carry or pull the unit by its power cable.
• Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
• Never operate the unit if the housing is defective!
• Only open the unit housing or its attendant components if this is explicitly specified in the op-
erating instructions.
• Only carry out work on the unit that is described in this manual.
• Never carry out technical changes to the unit.
• Only use original spare parts and accessories.
Intended use
Only use the product described in this manual as follows:
• Connection to OASE pumps with EGC connection, that are suitable for control via this device.
• While adhering to the technical specifications.
Product Description
Overview
 A Description
Eco Control
1
2 Retaining frame for fastening the device to the wall, or for fitting it to the ground stake or holding
clip
3 Ground stake
4 Holding clip for fastening the device to the pump handle
5 Operating instructions Eco Control
Properties
Eco Control can be used to control EGC-capable OASE pumps.
Features:
• Connection to the EGC socket of the pump.
• Illuminated display.
• Does not require a separate power supply.
• Control of the pump capacity, switching the Seasonal Function Control (SFC) and Dynamic
Function Control (DFC) on or off, selection of programmes.
• Allows display of the pump status and malfunctions.
EN
11