Publicidad
Idiomas disponibles
Idiomas disponibles
Manually Setting the Time, Date & Units:
In normal mode, press MODE button to enter Time setting mode, then press and hold SET buttonfor approx. 3 seconds,
the time zone start to flash, use "UP" or "DOWN" buttons set the correct time zone.
Press "SET" button to confirm your setting, the language start to flash, use "UP" or "DOWN" buttons set the correct
language. The language order is: GER, FRE, ITA, SPA, DUT, DAN, ENG.
Press " SET " button to confirm your setting, the year display starts to flash, use "UP" or "DOWN" buttons to set the
correct year.
Press " SET " button to confirm your setting, the Month and Date icon display starts to flash, use "UP" or "DOWN" buttons
to set the date display on Month/Date or Date/Month.
Press " SET " button to confirm your setting, the month display starts to flash, use "UP" or "DOWN" buttons to set
the correct month.
Press " SET " button to confirm your setting, the date display starts to flash, use "UP" or "DOWN" buttons to set the correct
date.
Press " SET " button to confirm your setting, the 12/24 hour mode starts to flash, use "UP" and "DOWN" buttons to
set the correct 12/24 hour mode.
Press " SET " button to confirm your setting, the hour display starts to flash, use "UP" or "DOWN" buttons to set the
correct hour.
Press " SET " button to confirm your setting, the minute display starts to flash, use "UP" or "DOWN" buttons to set the
correct minute.
Press " SET " button to confirm your setting, the second display starts to flash, use "UP" or "DOWN" buttons to clear
the data.
Press " SET " button to confirm your setting and to end the setting procedures, enter the normal mode.
NOTE: You will automatically exit settings mode if no buttons are pressed for 10 seconds. Under normal mode,
press SET button to select °C or °F.
Setting the Alarm:
a. In normal mode, Press MODE button twice to check Alarm setting mode, then press and hold SET button for approx.
3 seconds, to set the Alarm 1. The alarm hour will begin blinking on the display where the clock time is usually shown.
b. To adjust the alarm hour, press the "UP" or "DOWN" buttons (press and hold to fast adjust). When alarm hour is set to your
satisfaction, press the SET button to proceed to the alarm minute preference. Press the "UP" or "DOWN" buttons
(press and hold to fast adjust), press the SET button to set the Alarm 2, the ALARM 2 is same operation as the ALARM 1,
after the setting, press the SET button again to exit alarm settings.
c. To turn the alarm ON or OFF, in normal mode, press the ALARM button to turn on the Alarm 1, the
symbol will display, press the ALARM button to turn on the Alarm 2, the
ALARM button to turn on the ALARM 1 andALARM 2, the
button again to turn off the alarm, when the alarm is set to OFF, the
d. When the alarm is in operation it will begin beeping with one short beep and continue with many short beeps if the
alarm rings longer than 10 seconds. You can snooze the alarm for 5 minutes by pressing the SNZ/LIGHT button.
Indoor / outdoor temperature and humidity
1. Indoor temperature -9.9°C ~ 50°C (14.18°F ~ 122°F), display LL.L when below -9.9°C and display HH.H when higher
than 50°C.
2. Outdoor temperature -50°C ~ 70°C (-58°F ~ 158°F), display LL.L when below -50°C and display HH.H when higher
than 70°C.
3. Temperature resolution: 0.1°C.
4. Indoor humidity range: 1%-99%, display 1% when below 1% and display 99% when higher than 99%.
5. Outdoor humidity range: 1%-99%, display 1% when below 1% and display 99% when higher than 99%.
6. Humidity resolution: 1 %RH.
7. When alarm ringing, temperature and humidity test will be stopped.
symbolwill display, press the
symbol will display, press the ALARM
symbol should not display.
Publicidad
