Publicidad
Idiomas disponibles
Idiomas disponibles
Self-leveling mode
Place the laser level in position making sure the pendulum lock switch is in the
unlock position.
If the tool is outside the self-leveling range the laser beam will blink at 2Hz until
the tool is level.
At this point, the laser level will stop blinking and you'll be able to use it normally.
Manual mode
This function is activated by placing the pendulum lock switch in the locked
position, in this mode you can use the laser level to project straight or level lines
on any surface.
If the self-leveling function is disabled, you won't get an accurate horizontal or
vertical leveling result.
On
Off
31
NIV20.indd 31
29/4/22 10:59
Publicidad
