Publicidad
Idiomas disponibles
Idiomas disponibles
BLADE SHARPENING - FIGURE
O
KEEP BLADE SHARP
FOR BEST MOWER
PERFORMANCE.
A DULL BLADE
DOES NOT CUT
GRASS
CLEANLY
OR MULCH PROPERLY.
USE PROPER
EYE PROTECTION
WHILE
REMOVING,
SHARPENING,
AND INSTALLING
BLADE. ENSURE
MOWER
IS UNPLUGGED.
Sharpening
the blade twice during a mowing
season
is usually sufficient
under normal
circumstances.
Sand causes the blade to dull quickly. If your lawn has sandy soil, more frequent
sharpening
may be required.
REPLACE
BENT OR DAMAGED
BLADE
IMMEDIATELY.
WHEN
SHARPENING
THE BLADE:
1. Make sure blade remains balanced.
2. Sharpen
blade at the original
cutting
angle.
3. Sharpen
cutting
edges on both ends of blade, removing
equal amounts
of material
from both
ends.
TO SHARPEN
BLADE
IN A VISE:
1. Ensure mower is unplugged
before removing
the blade.
2. Remove
blade from mower. See instructions
for removing
and installing
blade.
3. Secure blade (O-1)in
a vise (0-2).
4. Wear proper
eye protection
and gloves and be careful not to cut yourself.
5. Carefully
file the cutting
edges of the blade with a fine tooth file (0-3) or sharpening
stone, maintaining
the original
cutting
edge.
6. Check balance
of blade. See instructions
for blade balancing.
7. Replace blade on mower and tighten securely.
BLADE
BALANCING
Check balance
of blade by placing center hole in blade (P-l)
over a nail or round shank
screwdriver
(P-2), clamped
horizontally
in a vise (P-3). If either end of the blade rotates downward
file that end. Blade is properly
balanced
when neither
end drops.
STORAGE
POSITION
For more compact storing the mower can be stored in an upright position, with the handle folded over as shown in
figure Q. Insure mower is unplugged before storing. Loosen the two lower knobs (Q-l) and lower the handle sec-
tion (Q-2) into place. Be careful not to pinch power cord. Tighten the two lower knobs and stand the mower upright
so that it rests on its handle and back wheels and the blade side is against a wall.
Z_ CAUTION:
Pinch point. To avoid being pinched, keep fingers away from area between handles when lowering.
LUBRICATION
No lubrication is necessary. Do not oil the wheels. They have plastic bearing surfaces which require no lubrication.
ACCESSORIES
Recommended
accessories
for use with your tool are available
from your local dealer or authorized
service center. If you need assistance
regarding
accessories,
please call:
1-800-544-6986.
_k WARNING:
The use of any accessory
not recommended
for use with this tool
could be hazardous.
p/n 90550646
MULCH INSERT
p/n 242867-00
SIDE DISCHARGE
CHUTE
p/n 242501-05
REPLACEMENT
GRASS
BAG
MB-075
REPLACEMENT
BLADE FOR TYPE 1 MODELS
ONLY
MB-1800
REPLACEMENT
BLADE
FOR ALL EXCEPT
TYPE 1 MODELS
SERVICE
INFORMATION
All Black & Decker Service Centers are staffed with trained personnel
to provide customers
with efficient and reliable power tool service. Whether
you need technical
advice, repair, or genuine factory replacement
parts, contact the Black & Decker location nearest you. To find your local service
location,
refer to the yellow page directory under "Tools--Electric"
or call: 1-800-544-6986
or visit www.blackanddecker.com
FULL TWO-YEAR
HOME
USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects
in material or workmanship.
The defective
product will be
replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges
only, is to return the product to the retailer from whom it was purchased
(provided
that the store is a
participating
retailer). Returns should be made within the time period of the retailer's policy for exchanges
(usually 30 to 90 days after the sale).
Proof of purchase
may be required.
Please check with the retailer for their specific return policy regarding
returns that are beyond the time set for
exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized
Service Center for repair or replacement
at our
option. Proof of purchase
may be required.
Black & Decker owned and authorized
Service Centers are listed under
"Tools-Electric"
in the yellow pages of the phone directory.
This warranty does not apply to accessories.
This warranty
gives you specific legal rights and you may have other rights which vary from state to
state or province
to province.
Should you have any questions,
contact the manager
of your nearest Black & Decker Service Center. This product is
not intended for commercial
use.
FREE WARNING
LABEL REPLACEMENT:
If your warning
labels become illegible or are missing, call 1-800-544-6986
for a free replacement.
10
Publicidad
