GE 26 Manual Del Propietario Y Instalación página 16

I
I
stallati
str
S
efri erator
GE Derivative Model 26
Questions? Call 800.GE.CARES (800.432.2737} or Visit our Website at: GEAppliance.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT- save t hese instructions for l ocal
inspector's use.
• IMPORTANT -Observe all governing codes and
ordinances.
• Note to Installer - Be sure to leave these instructions with
the Consumer.
• Note to Consumer - Keep these instructions for future
reference.
• Skill level- Installation of this appliance requires basic
mechanical skills.
• Completion time - Refrigerator Installation 20 minutes
Water Line Installation 30 minutes
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered
under the Warranty.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway,
the refrigerator door and freezer drawer can be removed.
• To remove the refrigerator door, seethe Installing
the Refrigeratorsection.
• To remove the freezer drawer, see the Removing
the FreezerDrawer section.
WATER SUPPLY TO THE ICEMAKER AND DISPENSER
If the refrigerator has an icemaker,it will have to be
connected to a cold water line. AGE water supply kit
(containing tubing, shutoff valve,fittings and instructions)
is available at extra cost from your dealer,by visiting our
Website at GEAppliance.com (in Canada at
www.geappliances.ca)
or from Parts and Accessories,800.626.2002(In Canada
1.888.261.3055).
TOOLS YOU MAY NEED
10 mm Socket Ratchet/Driver
AdjustableWrench
1/4" OuterDiameter
Compression N ut
andFerrule(sleeve)
Phillips-Head Screwdriver
3/32", 1/8" and4 mm
Allen Wrenches
Flat-Head Screwdriver
1/8" Drill Bit and TapeMeasure
Electricor HandDrill
Pencil
1/4" Nut Driver
Pliers
Level
16