GE 26 Manual Del Propietario Y Instalación página 22

Installation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
I'_ REMOVE THE FREEZER DOOR (cont.}
[] Usethe tip of a screwdriver to separate the rail from
the rail cover.Tilt the front end up and lift the entire
door.
E3
r_ set the door front on a nonscratching surface.
Pushthe rail assemblies back into the cabinet.
CAUTION:
Pushboth sides of the rail
assemblies back at the same time.
[] REPLACING THE FREEZER DOOR
Two people may be required to complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO
THE SLIDES
[] Pullout the rail assemblies to the full length on each
side of the cabinet.
CAUTION:
Make sure to pull out the side
rails evenly.
REPLACING THE FREEZER DOOR (cont.}
rB1 Hang the freezer door front onto open slots
on the sides.
r_ Tighten screws completely. (Thereare four
10 mm hex-head bolts.)
REPLACE THE FREEZER BASKET
Replacethe freezer basket by lowering it into the frame.
22