EGO HT2600 Manual De Instrucciones página 26

TROUBLESHOOTING
PROBLEM CAUSE
◾
Hedge trimmer
doesn't work .
◾
◾
◾
◾
◾
◾
Excessive
vibration or
noise .
◾
◾
◾
26
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC
The battery pack is not
attached to the hedge trimmer .
No electrical contact between
the hedge trimmer and
battery pack .
The battery pack is depleted .
The battery pack or the hedge
trimmer is too hot .
The front and rear triggers are
not depressed simultaneously .
The blade is jammed .
Dry or corroded blades .
Blades or blade support is bent .
Bent or damaged teeth .
Loose blade bolts .
SOLUTION
◾
Attach the battery pack to the hedge
trimmer .
◾
Remove the battery, check contacts
and reinstall the battery pack
◾
Charge the battery pack .
◾
Remove the battery pack from the
hedge trimmer and allow the battery
or the hedge trimmer to cool until their
temperature drops below 152°F (67°C) .
◾
Press the lock-off button first and then
press the triggers in the front and rear
handle simultaneously .
◾
Remove the battery pack from the
machine, remove the obstruction
carefully, then reinsert the battery and
restart the machine .
◾
Lubricate the blades, following the
instructions in the "LUBRICATING THE
BLADE" section in this manual .
◾
Replace with a new blade or support .
Contact EGO service center for blade or
blade replacement service .
◾
Replace with a new blade . Contact EGO
service center for blade replacement
service .
◾
Tighten the blade bolts . Use an adjustable
wrench and a 3 mm/4 mm hex wrench
(not included) to tighten the blade bolts
clockwise .