GE 16 Manual Del Propietario E Instalación página 15

Installation Instructions
CONNECTING ENERGY SMART APPLIANCE
[_] REMOVE LABEL OVER INTERCONNECT CABLE CONNECTOR ON ACCESS COVER
LABEL
_] CONNECT APPLIANCE TO ACH
2.1 Locate interconnect cable.
This accessory is part of ACM
kit.
2.2 Plug interconnect cable into
connector on access cover as
shown.
2.3 Plug opposite end of
interconnect cable into ACM.
2.4 Refer to ACM kit instructions
to connect ACM to Nucleus
TM
energy manager or Smart Meter
i-_ PLACE ACH
NOTE: The ACM cGn be pl(sced on top, bGck, or side of refrigerGtor. ACM cGn Glso be
installed without direct contact with refrigerator (for example in adjoining cabinets).
See ACM mGnuGI for further ACM instGIIGtion detGils.
15