THOMSON DS120CD Manual De Instrucciones página 22

2. Make sure that you have set the clock correctly.
3. Press ALARM button in shutdown state, the display will flash ON to select setting alarm
4. Press the ALARM confirm, the time display will blink.
5. Press or
6. Press or
7. Press ALARM to confirm, and then press
Press ALARM to confirm.
8. The volume would turn up from 0 to 20 gradually.
9. Press ALARM button in shutdown state, the display will flash ON to select setting alarm,
and the display will blink.
10. Press the or
Use
Carefully deploy the telescopic aerial.
Press the POWER button to turn on the device, which will automatically switch to CD
mode.
Play a disc
1. Press SOURCE repeatedly to select DISC source.
2. Put on a disc with the printed side facing upward.
3. Play starts automatically, if not, Press
4. Press the VOL+/VOL– to adjust the volume.
Pause / resume play
1. During play, press to
2. During play, long press
Skip to a track
For CD:
1. Press or
2. Press the VOL+/VOL – to adjust the volume.
For MP3 disc and USB/SD
1. Press or
2. Press the VOL+/VOL – to adjust the volume.
Search within a track
1. During play, press and hold
2. Release to resume normal play.
Listening to radio
You can program a maximum of 20 preset radio stations (FM).
1. Press the SOURCE button to select RADIO mode. The unit will be in FM radio mode.
2. Press or
3. Select the desired radio station by pressing the
4. Once you find a station you want to save, press the MEM button on the remote control,
"P01" will be shown on the display, press MEM+/MEM- until the desired memory position
button repeatedly to set hour. Press ALARM to confirm.
to set minute.
to select OFF to cancel alarm.
pause/resume play.
or button to fast forward/fast rewind.
to select another track.
to select a track or a file.
or
to search radio station.
or to select CD/FM/USB/SD status.
.
.
or button.
- EN 23 -