Publicidad
Idiomas disponibles
Idiomas disponibles
number appears on the display. Press the MEM again to confirm and save the current
station.
5. (Auto) Press and hole MEM button, The unit will automatically start and search the
frequencies,
all available stations are programmed in the order of waveband reception strength, the first
programmed radio station is broadcast automatically.
ATTENTION: For optimal reception, fully extend and adjust the position on the antenna.
Bluetooth mode
You need to carry out several steps to connect your mobile phone:
1.
Activate Bluetooth on your mobile phone (refer to the instructions for your phone).
2.
Push the
repeatedly until the LCD screen displays "BT". It will then be ready to be paired
automatically.
3.
Using your mobile phone, search for the Bluetooth device called "DS120CD".
4.
Your mobile phone will detect the "DS120CD" and will ask you if you want to connect.
To connect, enter the password 0000 (if applicable). Once the connection is made, the
"Connected" symbol will appear on the LCD screen.
Automatic connection with your smartphone
Pairing is only necessary when you first use the appliance with the phone. Once the device
has been paired with the phone, it will connect to the appliance automatically when it is
turned on and Bluetooth is activated on the phone. The next time you turn on the appliance,
it will automatically connect to the mobile phone it was last connected to.
Press and hold the button to disconnect the Bluetooth.
Playing from a Bluetooth device
Once the Bluetooth has been paired, press the
to switch to the previous or next track. To pause or resume play, press the
Play from external audio
You can play from an external audio device such as MP3 player through this unit.
Line in Jack (Requires a 3.5mm cable)
1. Connect a 3.5mm cable to the Line jack on top panel. Connect the other end of the
3.5mm cable to an Mp3 player or other audio device.
2. Press the button to turn the unit on.
3. Press the SOURCE button to switch to Line In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
Using the USB/SD input
1. Plug your USB flash drive or SD card to the USB socket or SD slot.
2. Press SOURCE button to select USB or SD mode, the unit can play automatically. If not,
press
.
3. Press the
or
4. Press the VOL+/VOL– to adjust the volume.
Remarks:
• USB/SD port is easy to sensitive equipment, will cause the equipment work is not stable.
POWER button to turn on the unit, then press the SOURCE button
to select track.
button to play. Press the
- EN 24 -
or
button
button again.
Publicidad
