Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Turning off. Fig. 20
Hold down the Start/Pause button on the robot to turn it off.
Warning
The robot vacuum cleaner has a power switch (with positions I and 0) located on the side
of the main body. If the robot will not be used for long periods of time, it is recommended to
turn it off using this switch. As a safety measure, if the robot is switched off, it will restore the
factory default settings. To operate the robot, the switch must be in the on position (I).
Cleaning modes
This robot includes different modes and functions that can be activated from the remote
control or the app.
Automatic mode. Fig. 21
Press the Start/Pause button on the robot vacuum cleaner, on the remote control or
-
select the automatic cleaning mode on the app, then the robot vacuum cleaner will start
the automatic cleaning.
-
The robot will clean the whole surface, edges, around objects such as tables, chairs etc.,
until the battery is low, then it will return to the charging base.
Random mode
-
The robot vacuum cleaner will clean randomly until the battery percentage is low and it
will return to the charge base.
To activate this mode, press the random cleaning button on remote control or on the app.
-
Scrubbing mode. Fig. 22
Attach the mop to the bracket and the latter to the mixed tank. Fill the water tank.
-
Place the mixed tank on the robot vacuum cleaner and select the scrubbing level with the
-
remote control or the app: high, medium or low.
-
Once you have selected the desired scrubbing level from the remote control or the app,
the robot vacuum cleaner will start the All in One function to vacuum, scrub and sweep
simultaneously thanks to its mixed tank.
Note
If you wish to mop, do not fill the water tank.
-
If the robot has the mixed tank installed with water in it, when it leaves the charging base,
-
it will turn around itself to soak the mop.
-
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop
after every use.
-
It is recommended to be present when the robot is scrubbing.
46
-
When the robot vacuum cleaner returns to the charging base, you must remove the mop.
Do not leave the robot vacuum cleaner charging with the mop assembled.
Spiral mode. Fig. 23
-
The robot will carry out an intense cleaning of a specific area when this mode is activated.
It will start cleaning at a specific spot and will move outwards in a spiral motion (1 metre).
Then, it will return to the starting spot in an inwards spiral motion again.
Once it has finished and returns to the starting spot, the robot will start cleaning in Auto
-
mode until it runs out of battery.
-
Before using this mode, place it in the spot you wish to clean.
Press the Spiral cleaning button on the remote control or the app to activate this mode.
-
Edge mode. Fig. 24
When this mode is selected, the robot will clean along walls and around furniture (e.g. table
or chair legs).
Press the Edge cleaning button on the remote control or on the app.
Room mode. Fig. 25
The robot will carry out a 30-minute cleaning cycle when this mode is selected.
-
Press the Room cleaning button on the remote control or on the app.
-
-
To ensure an efficient cleaning of the room, make sure the robot stays in the room.
Back home mode
Press the Back home button on the robot, on the remote control or on the app (with a house
icon) in order to send the robot to the charging base. The robot vacuum cleaner will continue
vacuuming until it reaches the charging base.
Manual mode
Select the manual cleaning mode on the app or on the remote control to steer your robot
vacuum cleaner manually.
Power level function
Select the power level on the remote control or on the app to control the robot suction power
during cleaning processes. There are three suction power levels: Turbo, Normal and Eco.
Setting the remote control time
-
Press the time setting button on the remote control. The digits will start flashing. Fig. 26
-
Select the day of the week using the upwards and downwards direction buttons. To save
the selected date, press the Start/Pause button. Fig. 27
Use the left and right direction buttons to set the minutes and hours. Use the upwards
-
and downwards arrow direction buttons to change the digits while they flash.
ENGLISH
47
Publicidad
