Candy CS44 128TXME/2-S Manual Del Usuario página 69

l
This option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled (can only
be used on some programmes as shown
in the table of programmes).
TEMPERATURE SELECTION
button
l
This button allows you to change the
temperature of the wash cycles.
l
It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the fabrics.
l
If you want carry out a cold wash all the
indicators must be off.
SPIN SELECTION button
l
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
l
If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
l
To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
l
It is possible to modify the spin speed
without pausing the machine.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
The machine is fitted with a special
electronic device, which prevents the
spin cycle should
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
STEAM button
(only available on certain models)
l
By this option you can add a specific
steam treatment to some washing cycles
(see programme table).
l
The steam function relaxes the folds and
makes ironing times shorter.
l
Fibres are regenerated and refreshed,
removing all smells from the items.
l
A dedicated steam treatment was devised
for each programme,
washing top efficiency depending on item
fabrics and colours.
This option must be selected before
pressing the START/PAUSE button.
EASY IRON button
(only available on certain models)
This function allows you to minimizes
creases as much as possible, eliminating
the intermediate spins or
intensity of the last one.
This option must be selected before
pressing the START/PAUSE button.
START SMART TOUCH
Simultaneously pressing the START/PAUSE
and OPTIONS buttons allows a previously
downloaded cycle to be started whilst the
Smart Touch position is selected on the
programme knob (for downloading cycles
from the App see the relevant section of this
user manual).
69
the load be
to guarantee
reducing the