TONOR TW515 Manual De Instrucciones página 8

RECEIVER INSTRUCTION FOR TW515 AND TW525
Receiver battery, inside the receiver.
1. POWER BUTTON
2. BATTERY INDICATOR
LIGHT INSTRUCTION
Signal light 4
Turns off: The receiver is not connected to the microphone.
Stays on red: The receiver and microphone A are successfully
connected.
Stays on green: The receiver and microphone B are successfully
connected.
Battery indicator 2
Red and green lights: Power on and charge. (It is not recommended to
power on and charge.)
Stays on red: Power off and charge. When the receiver is fully charged,
the red light turns off.
Stays on green: The receiver is power on. The receiver is fully charged.
Turs off: The receiver is power off.
TROUBLESHOOTING
No sound for TW515 (The batteries of microphone have already
been installed, but the signal light still turns off.)
Wireless Microphone ID Pairing Steps:
1. Make sure that the receiver and microphone are turned OFF.
2. Unscrew the microphone tail tube and install the batteries into the
mic's battery compartment.
3. Turn on the microphone, and press setting button ⑤ (on the
microphone), until the microphone screen flashes quickly, then release
settting buttons.
4. Turn on the receiver's power button, waiting for red signal light
1 2 3 4
ON/OFF DC/5V
- +
3. USB-C CHARGING PORT
4. SIGNAL INDICATOR
05