Weller WSR 200 Traducción Del Manual Original página 16

EN
ENGLISH
Repairs must always be referred to a
Weller-trained specialist.
Use original replacement parts only.
WARNING Risk of burns
Only replace the soldering tips when they are cold.
•
The soldering tool must be left switched off in the safety rest
for at least 3 minutes until the soldering tip has cooled down.
The LED status indicator must be at „OFF".
Temperature performance
The soldering tool has an internal usage sensor which can
be used to set an automatic switch-off function (Stand-by).
The settings can be found in the station's operating instruc-
tions.
Warranty
Claims by the buyer for physical defects are time-barred
after a period of one year from delivery to the buyer. This
does not apply to claims by the buyer for indemnification in
accordance with §§ 478, 479 BGB (German Federal Law
Gazette).
We shall only be liable for claims arising from a warranty
furnished by us if the quality or durability warranty has been
furnished by use in writing and using the term „Warranty".
The warranty shall be void if damage is due to improper use
and if the device has been tampered with by unauthorized
persons.
For more information please visit
www.weller-tools.com.
Technical Data
Soldering iron
Temperature range °C
Temperature range °F
Power consumption
Mains supply voltage
Heat-up time
(50°C to 350°C) (120°F to 660°F)
Tip type series
Safety rest
Supply unit
12
Symbols
Caution!
Warning! Risk of burns!
Read the operating instructions!
Before performing work of any kind on the unit,
always disconnect the power plug from the
socket.
ESD-compatible design and ESD-compatible
workstation
CE mark of conformity
British Conformity Mark
Disposal
Do not dispose of electric tools together with
household waste material! In observance of Eu-
ropean Directive 2012/19/EU on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools
that have reached the end of their life must be
collected separately and returned to an environ-
mentally compatible recycling facility.
Disposal - UK
Do not dispose of electric tools together with
household waste material! In observance of Bri-
tish Directive 2013 No. 3113 on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools
that have reached the end of their life must be
collected separately and returned to an environ-
mentally compatible recycling facility.
Pico
WXMPS MS
100 - 450
200 - 850
40 W
12 V / AC
3 s
RTMS MS / RTPS MS
WSR 208
WX Smart Station
Ultra
WXUPS MS
100 - 450
200 - 850
150 W
24 V / AC
7 s
RTUS MS
WSR 200