Publicidad
loop or soft shackle. The accessory loop can be
used to attach connectors for resetting mechanical
advantage systems or for stowing CAPTO on a
harness, gear loop, or equipment rack. It should not
be considered a life-supporting or load bearing / rated
attachment point.
It is important to keep the length of the accessory
loop sufficiently small so that it cannot pass behind
the Cam and cause the Cam to be held open. Monitor
the accessory loop when in use to make sure it does
not get pulled into the Cam. An accessory loop of
any size could interfere with the function of the Cam
or Sideplate. Do not close the Sideplate with the
accessory loop inside. Attach an accessory loop at
your own risk.
7. EQUIPMENT RECORDS
Record the results of your detailed periodic inspection
using the inspection procedures and forms available
at cmcpro.com or the sample table provided in this
section. Relevant information includes: type, model,
manufacturer contact info, serial number or individual
number, problems, comments, inspector's name
and signature, and key dates including manufacture,
purchase, first use, and next periodic inspection. If
equipment fails inspection, it should be withdrawn
from service and marked accordingly or destroyed to
prevent further use.
8. ADDITIONAL
INFORMATION
See Section 8.
|
CAPTO USER MANUAL
31
Publicidad
