OETIKER CAL 02 Instrucciones De Funcionamiento página 4

Operating Instructions
Test Equipment
OETIKER CAL 02
Introduction
Validity
These operating instructions are valid for Test Equipment CAL 02. The operating instructions of the dial gauge also
apply and must be observed.
Proper use
The Test Equipment CAL 02 is intended exclusively for verifying the closing force of OETIKER installation tools. Any
other use is considered to be "improper use". Improper use includes, for example, checking the force of tools for which
the Test Equipment CAL 02 has not been approved, and/or checking the force of tools which are not OETIKER
products. The Test Equipment CAL 02 must not be used for imparting blows (as a hammer) or otherwise as a manual
tool. The manufacturer is not liable for any damage resulting from improper use or incorrect operation.
Delivery scope
Version 1 – with MarCator 1087 dial gauge*
- Closing force sensor (SKS 02),
fitted with closing force lugs 10 mm wide (SKB 10)
- MarCator 1087 dial gauge
- Hexagon key, 2.5 mm A/F
- Hexagon key, 3 mm A/F
- Operating instructions
- Case
- Loctite 243 adhesive, 5g
Version 2 – with MarCator 1081 dial gauge**
- Closing force sensor (SKS 02),
fitted with closing force lugs 10 mm wide (SKB 10)
- MarCator 1081 dial gauge
- Hexagon key, 2.5 mm A/F
- Hexagon key, 3 mm A/F
- Operating instructions
- Case
- Loctite 243 adhesive, 5g
Version 3 – without dial gauge
- Closing force sensor (SKS 02),
fitted with closing force lugs 10 mm wide (SKB 10)
- Hexagon key, 2.5 mm A/F
- Hexagon key, 3 mm A/F
- Operating instructions
- Case
- Loctite 243 adhesive, 5g
Technical data
Closing force sensor SKS 02
Closing force range:
Dimensions:
Weight:
Accuracy of SKS 02 with MarCator 1087 dial gauge:
Accuracy of SKS 02 with MarCator 1081 dial gauge:
Closing force sensor SKS 02 - with closing force lugs SKB 10
Closing force range:
Ultimate load:
Jaw spacing for measurement:
Dimensions:
Jaw width:
www.oetiker.com
4
Operating Instructions English Edition 02.09
Item no. 13600243
13600242
05006097
08901832
08901808
08901805
08901807
08901482
Item no. 13600244
13600242
05006096
08901832
08901808
08901805
08901807
08901482
Item no. 13600245
13600242
08901832
08901808
08901805
08901807
08901482
500 N – 10 000 N
ca. 77 x 18 x 46 mm
ca. 245 g
+/- 200 N
+/- 200 N
(SKB 10-set: item no. 13600058)
500 N – 7 500 N
10 000 N
6.5 mm +/- 0.5 mm
ca. 84 x 18 x 46 mm
10 mm
* Electronic data exchange possible
** No electronic data exchange
08901805