Manhattan 180542 Instrucciones página 2

For specifications, please visit manhattanproducts.com. Register your product at
register.manhattanproducts.com/r/180542 or scan the QR code on the cover.
1 Unlock unit door(s) and open them.
2 To fit larger devices, remove bay divider(s).
• Unscrew bar and set it aside.
• To remove divider, pull up on the clip to release it from the bar it's attached to.
• When enough dividers are removed, replace bar and screws.
3 Connect devices to power outlets with appropriate
cables. Secure cables with wire clips on dividers.
• Connect power cables to power outlets, feeding
cables through holes on back panel.
• Load devices in bays.
• Connect cables to devices.
2
English
Setup
1
3
Instructions