Publicidad
Maintenance
Wartnung
Mantenimiento
Problem
- Monitor does not switch
on.
- Monitor is switched on but
no image is displayed.
- The picture quality is not
good.
- The volume is too low.
- Connected electric strike
does not work.
- Video and audio signal is too
weak or with interference
- There is no sound coming
from the outdoor unit.
3663602632122-Blyss-IM-V04.indb 100
Maintenance
Manutenção
Solution
Make sure that the monitor is connected to the power source.
-
- Do not use extension cords, as the voltage might not be suffcient to
power on the device.
Check the wire connections between the outdoor unit and the
-
monitor (including the correct polarity).
- Make sure there is no direct light source pointed at the monitor.
- Check the orientation of the camera on the outdoor unit.
-
Use suitable accessories within 12 V, 500 mA. Only install lock
-
having a mechanical storage system.
The monitor is installed too close to other electronic devices. Move
-
other electronic devices away.
- Please check the distance between indoor unit with outdoor
unit, and also check the cross section of the cables used, it should
be followed by this requirement: 2 wires 0~25 m, min. 0.75 mm
The microphone might be obstructed or stained. Clean it carefully
-
with a soft moistened cloth.
2 wires 25~100 m, min. 1.5 mm
100
2
.
2
14/2/2019 2:47 PM
Publicidad
