1- Safety instructions
Before using your equipment, we recommend that you read all the
instructions in this manual.
WARNING
PLEASE NOTE:
CLASS 2 LASER DEVICE
LASER RADIATION
DO NOT LOOK INTO THE BEAM
Visible and invisible LASER radiation. Avoid direct or indirect exposure to
eyes or skin! LASER Class 2 EN60825-1:2014 in compliance with the
following European Directives:
LVD Directive 2006/95/EC
RoHS 2 Directive n°2011/65/EU
EMC Directive n°2014/30/EU
Keep this manual for future reference. If you resell this appliance, please ensure that
you also pass on this user manual to the new owner.
Completely unpack the appliance and all its accessories. Check that there is no
damage and that the appliance is in perfect condition.
It is important to use the mains power cable supplied (earthed cable).
Always unplug the appliance before servicing or performing any maintenance.
Maximum ambient temperature for optimum operation of the appliance: 40°C. Do not
use the device if the ambient temperature exceeds this value.
In the event of a malfunction, switch off the appliance immediately. Do not attempt
to repair it yourself. Contact your retailer or an authorised specialist repairer. There
are no user-replaceable parts except for the fuse.
Do not connect this appliance to a dimmer pack.
To reduce the risk of electric shock or fire, do not use this appliance in damp or rainy
English
6