Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature
(1)
Press the TEMP/TIME
up arrow button to raise the
temperature.
Each time you press or hold the TEMP/TIME
up
arrow button, the temperature wilt go up I°F until it reaches
86°F (30°C).
NOTE: After 5 seconds, the display wilt show the current room
temperature.
TEMP / TIME
(2)
Press the TEMP/TIME
down arrow button to lower the
temperature.
Each time you press or hold the TEMP/TIME
down arrow button, the temperature wilt go down I°F until it
reaches 61°F (16°C).
NOTE: After 5 seconds, the display wilt show the current room
temperature.
Timer
Delay
To set the Timer
for a 1=hour to 24-hour
delay until the air
conditioner
turns
off (the air conditioner
must
be On):
1.
Press TIMER. Timer On indicator light wilt flash. Display will
show remaining hours before the air conditioner wilt turn off.
TIMER
ON
OFF
To set the Timer to turn on the air conditioner,
changing
the previous
settings:
1. Turn on the air conditioner.
2. Adjust the mode to Fan, Coot, Energy Saver or Dehum.
3. For Fan, Cool or Energy Saver mode, adjust the fan speed to
High, Med or Low.
NOTE: In Dehum mode, the Speed button wilt not operate.
4. Adjust the temperature between 61°F and 86°F (16°C and
30°C).
NOTE: In Fan mode, the temperature cannot be set.
5. Wait 3 seconds before turning off the air conditioner.
6. Press TIMER. Timer On indicator light will flash. Display wilt
show remaining hours before the air conditioner wilt turn on.
7. Press the TEMP/TIME
up or down arrow button to change the
delay time from 1 hour to 24 hours.
8. After 5 seconds, Timer On indicator light will remain on.
Display wilt show the current room temperature.
To clear Timer de{ay program:
NOTE: Air conditioner can be either on or off.
1. Press TIMER once after it has been programmed.
Display wilt
show remaining time.
2. While the display is showing the remaining time, press TIMER
again. Timer Off indicator light wilt turn on.
To see or change
the remaining
time (in hours):
1. Press TIMER once after it has been programmed.
Display wilt
show remaining time.
2. While the display is showing the remaining time, press the up
or down TEMP/TIME
button to increase or decrease the time.
3. After 5 seconds, the display wilt show the current room
temperature.
2.
Press the TEMP/TIME
up or down arrow button to change the
delay time from 1 hour to 24 hours.
3.
After 5 seconds, Timer On indicator light wilt remain on.
Display wilt show the current room temperature.
To set the Timer to turn on the air conditioner,
keeping
previous settings:
Turn on the air conditioner.
1,
2.
Press TIMER. Timer On indicator light wilt flash. Display will
show remaining hours before the air conditioner wilt turn on.
3.
Press the TEMP/TIME
up or down arrow button to change the
delay time from 1 hour to 24 hours.
4.
After 5 seconds, Timer On indicator light will remain on.
Display wilt show the current room temperature.
10
Publicidad
