Cleaning And Maintenance - KPC CKS380 Instrucciones De Uso

Start the motor and lower the machine to the "work" position using the handle on the right
hand side of the machine. Activate the clutch trigger and engage the motor fully. Move the
lawn scarifier forwards and backwards across the lawn. After the first aeration remove any
lose moss from the lawn. In the event that there is still moss in the lawn, aerate again at an
angle of 90 degrees to the previous aeration.

Cleaning and Maintenance

After use remove any moss attached to the shield. Stop the motor, remove the sparkplug cap and
tip the machine back. Clean under the shield with a brush.
If cleaning the machine with a hose, use a low pressure so as to avoid damaging the machines
stickers. Also avoid spraying the blade bearing directly. After washing the machine it is a good
idea to start the machine and let the rotor blades run without resistance for a short period of time.
Never use a high pressure cleaner to clean the lawn scarifier.
Spray exposed areas with a corrosion protective spray.
Never tilt the machine more than 20 degrees as this can result in oil leaking into the cylinder.
Follow the motor manual instructions when performing motor maintenance.