Zycoo X10 Guía De Instalación Rápida página 3

System Login Wizard
1
Connect X10 to DC adapter or PoE network cable.
2
After start-up, press the volume+ button and volume- button simultaneously for about 3
seconds. Then X10 will play the IP address as it's DHCP by factory default settings. If
it's failed to get the IP address, please use the default IP address 192.168.1.101. You
can login X10 Web GUI with that IP address via your browser. The default username and
password both are admin.
Installation
1
Drill 4 holes on the mounting rack for M4 Clamping Screws as per 143*46mm as
below dimension diagram.
2
Fix X10 into the mounting rack via M4*10 Clamping Screws.
3
Connect X10 with DC power, network cable, phoenix connector and grounding
cable.
1
English
143.0 mm
153.0 mm