Publicidad
Idiomas disponibles
Idiomas disponibles
Stud detector function
Calibration must be done each time a new mode is selected.
Do not touch the sensing area of the device during measurement in order to avoid mistakes, because the human body has
conducting properties.
Display icons
1
2
3
4
Metal detection mode
The metal detection mode is used for the detection of hidden objects made of ferrous and non-ferrous metals. Press the SURVEY button (8)
to switch to the stud detector function. The metal detection mode is set by default.
Calibration
1.
Press the SURVEY button (8) to enter the menu. Select the Metal calibration (Metal detection calibration).
2.
Place the device flat against the target surface. Make sure that there are no metal objects around.
3.
Press the MEAS button (7) to start the calibration. The calibration will be carried out automatically. When the white part of the display
becomes dark, the calibration is completed.
4.
Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
Usage
1.
Complete the calibration and place the device flat against the surface to be tested. When a red line appears on the screen, the device is
ready to scan.
2.
Slowly move the detector across the surface in the direction you want to scan.
3.
When the device detects a metal object, the screen will display the icon
the distance to the target, and the signal strength indication. The device will emit a sound. The closer the device is to the object, the
stronger the signal will be.
4.
When the signal is the strongest, the center mark (18) lights up. Move the device to locate the object according to the signal intensity.
!
If you're receiving erratic scanning results, it may be a result of humidity, moisture within the wall cavity or drywall, or recently
applied paint or wallpaper that isn't fully dried.
Stud detection mode
The device can scan the surface for wooden and/or metal studs.
Calibration
Automatic calibration
Press the SURVEY button (8) to enter the menu. Press the Right/+ button (9) to select the stud detection mode.
1.
2.
Place the device flat against the target surface.
3.
Press the MEAS button (7) to start calibration. The calibration will be carried out automatically. When the white part of the display
becomes dark, the calibration is completed.
4.
Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
If the device does not search for wooden/metal objects after automatic calibration, you need to calibrate the device manually.
Manual calibration
1.
Press the SURVEY button (8) to enter the menu. Press the Right/+ button (9) to select the stud detection mode.
2.
Place the device flat against the target surface. When the display becomes dark, press the MEAS button (7) to force the device to
calibrate.
3.
Slowly move the detector across the surface in the direction you want to scan. When the signal is the strongest, the center mark (18)
lights up.
4.
Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
Usage
1.
Complete the calibration and place the device flat against the surface to be tested.
2.
Slowly move the detector across the surface in the direction you want to scan.
3.
If a stud is detected, the screen will display the wooden/metal stud icon
strength indication. The device emits a sound. The closer the device to the object, the stronger the signal.
AC detection mode
This mode is used only to detect live wires.
Calibration
Press the SURVEY button (8) to enter the menu. Press the Right/+ button (9) twice to select the AC detection mode.
1.
2.
Place the device flat against the target surface.
3.
Press the MEAS button (7) to start calibration. The calibration will be carried out automatically. When the white part of the display
becomes dark, the calibration is completed.
4.
Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
Display information
Detection result
Non-ferrous metal
Ferrous metal
AC wire
Wooden/metal stud
Display icons
1
2
3
(non-ferrous metal) or
, the value of the distance to the target, and the signal
6
Mode
Stud detection
Metal detection
AC wire detection
(ferrous metal), the value of
Publicidad
