Information Plate Symbols - Walter ICECUT300 Manual De Instrucciones

•
Keep handles dry, clean and free from oil and grease.
Disconnect tools when not in use, before servicing and when changing accessories such as cutters, disconnect
12.
tools from the power supply.
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it
13.
on.
Avoid unintentional starting. Ensure the magnet is OFF before plugging the machine in.
14.
Use extension leads only intended for outdoor use when the tool is used outdoors.
15.
WARNING! The vibration emissions during actual use can differ from the declared total value depending on the
16.
ways in which the tool is being used.
Stay alert! Watch what you are doing, use common sense and do not operate the tool when you are tired. DO
17.
NOT operate the machine when under the influence of alcohol or ANY illegal substances.
Check for damaged or missing parts before use of the tool; it should be carefully checked to determine that it
18.
will operate properly for its intended function.
Warning! The use of any accessory or attachment, other than ones recommended in this instruction manual,
19.
may present a risk of personal injury.
Have your machine repaired by a qualified Walter technician. This electric tool complies with the relevant safety
20.
rules. Qualified persons using original spare parts should only carry out repairs otherwise this may result in
considerable danger to the user.
Never operate the machine if parts are missing or damaged.
21.
Never direct jets of water or flammable liquids over the drill.
22.

3) INFORMATION PLATE SYMBOLS

1
1. Refer to the user manual for operational and safety issues with regard to this machine.
2. Dispose of the machine and electrical components correctly.
3. Eye protection must be worn when operating the machine.
4. Ear defenders must be worn when operating the machine.
2
6
3 4